Poi/Ropedart Head from 100% Kevlar rope, with micro split ring for attachment. At a glance: head made from 100% Kevlar rope details heads: Pear: 150 g /9 cm; Apple: 165 g/10 cm; Dart: 170 g/12 cm; Chunky: 280 g/10 cm ready to ship in 3-5 days handmade in Leipzig/Germany

Fire ropedart leash made from Dyneema and Technora Dyneema has a smooth, non-abraisive surface and neglible stretch. You can choose between round 6 mm rope and flat 10 mm and 15 mm sash. The 6 mm and 10 mm versions are very lightweight and work best with lower head weights (Pear/Aplle/Dart). The 15 mm version is a bit heftier and works better for heavier heads(Dart/Chunky). The leash comes with a spliced loop handle and a swivel at the head. Check our guide to choose the right length. Leashes are made with a 30 cm Technora lead at the end of the Dyneema rope. This combines the abrasion resistance of Dyneema with the heat resistance of Technora where it matters most. Still, Technora should never be soaked with fuel or left hanging directly in the flame for prolonged time. Check out further tips for fire prop care here. At a glance: smooth, low-stretch Dyneema leash with heat resistant Technora lead Leash-options: 6 mm rope; 10 mm; 15 mm sash default total length: 290 cm ready to ship in 3-5 days handmade in Leipzig/Germany *custom made, not a stock item

Single Technora tether for fire poi. You can choose between 8 mm, 10 mm, 8 mm with swivel and chain with swivel and Technora handle. You can find out mire about splicing here. About swivels: they can be included in a setup in order to make orbitals possible. However this is the only trick that requires them. Apart form that, a swivel negatively affects stalls and throws. Technora should never be soaked with fuel or left hanging directly in the flame for prolonged time. Check out further tips for fire prop care here. IMPORTANT! The knobs can sweel up and soften when directly or indirectly (fumes) in contact with fuel. Hence, make sure to wrap them in an extra plastic bag when storing. at a glance: fire resistant Technora rope tether-options: 8 mm; 10 mm; 8 mm with swivel; chain and swivel  knob weight: POM 16 g; PLAY 33 g default total length: 53 cm ready to ship in 3-5 days handmade in Leipzig/Germany *custom made, not a stock item

Fire ropedart with Dyneema-Technora leash and head made from 100% pure Kevlar.  Dyneema has a smooth, non-abraisive surface and neglible stretch. You can choose between round 6 mm rope and flat 10 mm and 15 mm sash. The 6 mm and 10 mm versions are very lightweight and work best with lower head weights (Pear/Aplle/Dart). The 15 mm version is a bit heftier and works better for heavier heads(Dart/Chunky). The leash comes with a spliced loop handle and a swivel at the head. Check our guide to choose the right length. Leashes are made with a 30 cm Technora lead at the end of the Dyneema rope. This combines the abrasion resistance of Dyneema with the heat resistance of Technora where it matters most. Still, Technora should never be soaked with fuel or left hanging directly in the flame for prolonged time. Check out further tips for fire prop care here. At a glance: smooth, low-stretch Dyneema leash with heat resistant Technora lead Leash-options: 6 mm rope; 10 mm; 15 mm sash default total length: 300 cm head made from 100% Kevlar rope details heads: Pear: 150 g /9 cm; Apple: 165 g/10 cm; Dart: 170 g/12 cm; Chunky: 280 g/10 cm ready to ship in 3-5 days handmade in Leipzig/Germany *custom made, not a stock item

Fire poi with a head made from 100% Kevlar, fire resistant Technora tethers and a choice of soft PomGrips™ (lanternsmith) and round Silicon Knobs (Play Juggling). Optimized for clean with stalls and a lush flame shape. Comes with spliced, heat-resistant Technora tethers. You can choose between 8 mm and 10 mm Technora, as well as a welded chain with Technora handle. Read more about splicing here. A swivel can be added to enable orbitals, however the feeling of a regular contact poi is better preserved without one and tosses will be easier . While Technora is highly heat resitant, it should never be soaked with fuel or left hanging directly in the flame for prolonged time. To avoid unwanted fuel uptake while soaking the poi, the Technora and head are separated by a few segments of chain. A piece of Kevlat seeving additionally protects the tether from direct heat near the head. Check out further tips for fire prop care here. IMPORTANT! The knobs can sweel up and soften when directly or indirectly (fumes) in contact with fuel. Hence, make sure to wrap them in an extra plastic bag when storing. at a glance: fire resistant Technora rope tether-options: 8 mm; 10 mm; 8 mm with swivel; chain and swivel  knob weight: POM 16 g; PLAY 33 g details heads: Pear: 150 g /9 cm; Apple: 165 g/10 cm; Dart: 170 g/12 cm; Chunky: 280 g/10 cm default total length: 63 cm ready to ship in 3-5 days handmade in Leipzig/Germany *custom made, not a stock item

Fire meteor-dart with Dyneema-leash and heads made from 100% pure Kevlar.   Dyneema has a smooth, non-abraisive surface and neglible stretch. You can choose between round 6 mm rope and flat 10 mm and 15 mm sash. The leash comes with a spliced loop handle and swivels at the base of the meteor-segments and at the head. Check our guide to choose the right length. Leashes are made with 50 cm Technora meteor segments at the end of the Dyneema rope. This combines the abrasion resistance of Dyneema with the heat resistance of Technora where it matters most. Still, Technora should never be soaked with fuel or left hanging directly in the flame for prolonged time. Check out further tips for fire prop care here. At a glance: soft, low-stretch Dyneema rope with Technora meteor-segments default: 50 cm meteor-segments (1 m head-seperation), 2,4 m leash, 3,0 m total length details heads: Pear: 150 g /9 cm; Apple: 165 g/10 cm; Dart: 170 g/12 cm; Chunky: 280 g/10 cm ready to ship in 3-5 days handmade in Leipzig/Germany *custom made, not a stock item

Snake-poi made from 100% Kevlar, with soft PomGrips™ (lanternsmith) or round Silicon Knobs (PLAY Juggling). For an impressive flame size and optimized for precise handling. The snakes are made from 13 mm Kevlar rope. The terminating knot gives them a similar feel as regular poi, enabling clean stalls and tosses. The snakes have a length of 45-50 cm. The variation of length is inherent to the production process. You will always recieve a pair of matching length. Comes with spliced, heat-resistant Technora tethers. While Technora is highly heat resitant, it should never be soaked with fuel or left hanging directly in the flame for prolonged time. To avoid unwanted fuel uptake while soaking the poi, the Technora and head are separated by a few segments of chain. A piece of Kevlat seeving additionally protects the tether from direct heat near the head. Check out further tips for fire prop care here. IMPORTANT! The knobs can sweel up and soften when directly or indirectly (fumes) in contact with fuel. Hence, make sure to wrap them in an extra plastic bag when storing. at a glance: fire resistant Technora rope knob weight: POM 16 g; PLAY 33 g Head aus 100% Kevlar-Seil default total length: 63 cm ready to ship in 3-5 days handmade in Leipzig/Germany *custom made, not a stock item